222 UVC Australia - Far UVC Lights

UV222 Vertex

When you need to maximise room coverage and get the santizing done very qickly.



Specifications


Light source Krypton chloride excimer lamp
Wave length 222 nm
Output 460 mW (Typical)
Angle coverage 150°
Operating modes Continuous / duty cycle / motion activated
Operating temperature 0° to + 40° C
Input voltage 85-305V AC 50/60 Hz
Max. power consumption 120 W
Weight 4.5 kg (excluding mobility base)
Dimensions 167 mm x 137 mm x 530 mm
Power cord 3 x 0.75 mm² / 5 m / Nylon / 3 pin plug for AUS wall power socket
Lamp lifespan 17,000 hrs
IP Rating IP65
Materials of construction Aluminum, Quartz glass
Colours White

Features



Wavelength

🔴 UV222 Far UV-C excimer lamp with an optical band-pass filter

🟢 A typical krypton chloride 222 nm Far UV-C excimer lamp without an optical band-pass filter

WARNING!
Unfiltered Far UV-C can cause cancer and may increase the risk of cataracts.



Light Distribution

Here's an indicative simulation of two Vertex lights in a 60 m² room.

The lights are in diagonally opposite corners.

The UV222 light intensity results is indicated at 0.8 m above floor level.

Values are μW/cm²

For this configuration it means achieving 90% inactivation of Staphylococcus in about than 20 minutes and 99% in about 30 minutes.



Dimensions



Mobility

The Vertex can be mounted into a fixed location, on the wall, ceiling or in a corner.

It is also available with a 5 wheel medical trolley base. This allows the light to be easily moved throught your medical facility.